Automobile 93140014 pneumatic line quick coupling fitting
1. Introduction of Pneumatic Coupling
Pneumatic Coupling (also referred to as air couplers, or pneumatic quick disconnects), are primarily used for pneumatic applications, connecting air tools, hoses, or other implements to compressed air supplies. They are also used with other gases, and (with the exception of the E-z-mate Series) can be used with low pressure fluids.
2.Structure of Pneumatic Coupling
Standards rubber has in cooperation with leading commercial vehicle manufacturers, developed and produced an air coupling system based on composite material and brass. pneumatic system coupling system is developed for use with Polyamide and Hytrel tubing for the compressed air circuits on commercial vehicles, and is fulfilling all global requirements.The carefully developed, matured and thoughtful pneumatic system couplings system consists of the following elements:
• Push-in couplings
• Building Blocks
•Hose nipples,hose connector
3.Material of Pneumatic Coupling
|Metal Body||Nickel Plated copper or copper|
|Materials of body||Plastic (Polybutylene terephthalate)|
|Release Button||POM (Poly oxy methylene copolymer)|
|Grip Ring||Stainless Steel|
|Tubing Material||Polyurethane, Nylon, Polyethylene, and Polypropylene|
4.Specification of Pneumatic Coupling
|Operating Pressure||0 – 150 CZPT 0 – 990 kpa|
|Operating Temperature||0 – 60 °C 32 to 140F|
|Types||Elbow,Straight,Tee, X, Y,|
5.Features & Benefits of Pneumatic Coupling
•System cost reduction
•One global system
•Up to 83 % weight reduction
6. Applications of Pneumatic Coupling
This new generation of couplings, based on composite materials in
combination with leading coupling technology.
Brass components secure structural integrity in highly stressed areas.
One global system, fulfilling different engineering philosophies within
truck, bus, trailer, off-road applications.
HangZhou standards rubber products Co., Ltd. has been focusing on injection molding technology, supporting the main automobile pipeline system to study the non dust products, quick joint metal pipe ,Committed to the automotive fluid pipeline valve (one-way, quick connector check, pressure) . Our main products include: quick joint, pipe assembly, pipe dust cover. Provide sample processing and OEM services.
1. Customized of kind specification according to customer’s requirement.
2. Can provide OEM service .
3. Accept a small order.
4.We can offer free sample.
Q1. How do you ensure your product and service quality?
All our processes strictly adhere to ISO-9001 procedures. If the product does not work property as described, and the problem is proven to be caused by our side, we will provide exchange services for the same specific item. Also, Standards Rubber staffs will always be there for you if anything needed.
Q2. Can I buy 1 or 2 pieces of samples for testing before place bulk order?
Yes, we are pleased to send you samples to test the quality and performance. We are confident that once you get it in you hand. You will be very satisfied. Moreover, with our excellent service and competitive price. We believe that we will be your first choice for rubber hose.
Q3. How can I order and make payment?
Once clear your requirement and determined which product is ideal for you. We will send proforma invoice to you. You can pay via TT bank transfer, Western Union as you like!
Q4. What is your Minimum Order Quality?
Different products have different MOQ, generally speaking, our MOQ is 1000meter/type, please don’t hesitate to check with us for specific items.
Q5. What about delivery date?
If we have free stock of the item you need. We can send goods to you within 7 working days after deposit or 100% payment into our bank account. If we don’t have the stock, the delivery date can be different for different products. Generally speaking, it will takes 3 to 6 weeks.
Q6. What’s your company policy if we want to distributing your rubber and plastic hose in our market?
We have some different policies for different target market, so please feel free to contact us for detailed discussions and find the most preferential policies for you. Also, you are welcome to visit our factory and let’s talk face to face!
|Standard:||DIN, ANSI, GB, JIS, BSW|
|Surface Treatment:||Without Treatment|
Types of Couplings
A coupling is a device used to join two shafts together and transmit power. Its purpose is to join rotating equipment while permitting a degree of end movement and misalignment. There are many types of couplings, and it is important to choose the right one for your application. Here are a few examples of couplings.
The mechanical coupling is an important component in power transmission systems. These couplings come in various forms and can be used in different types of applications. They can be flexible or rigid and operate in compression or shear. In some cases, they are permanently attached to the shaft, while in other cases, they are removable for service.
The simplest type of mechanical coupling is the sleeve coupling. It consists of a cylindrical sleeve with an internal diameter equal to the diameter of the shafts. The sleeve is connected to the shafts by a key that restricts their relative motion and prevents slippage. A few sleeve couplings also have threaded holes to prevent axial movement. This type of coupling is typically used for medium to light-duty torque.
Another type of mechanical coupling is a jaw coupling. It is used in motion control and general low-power transmission applications. This type of coupling does not require lubrication and is capable of accommodating angular misalignment. Unlike other types of couplings, the jaw coupling uses two hubs with intermeshing jaws. The jaw coupling’s spider is typically made of copper alloys. In addition, it is suitable for shock and vibration loads.
Mechanical couplings can be made from a variety of materials. One popular choice is rubber. The material can be natural or chloroprene. These materials are flexible and can tolerate slight misalignment.
Electrical coupling is the process in which a single electrical signal is transferred from a nerve cell to another. It occurs when electrical signals from two nerve cells interact with each other in a way similar to haptic transmission. This type of coupling can occur on its own or in combination with electrotonic coupling in gap junctions.
Electrical coupling is often associated with oscillatory behavior of neurons. The mechanism of electrical coupling is complex and is studied mathematically to understand its effect on oscillatory neuron networks. For example, electrical coupling can increase or decrease the frequency of an oscillator, depending on the state of the neuron coupled to it.
The site of coupling is usually the junction of opposing cell membranes. The cellular resistance and the coupling resistance are measured in voltage-clamp experiments. This type of coupling has a specific resistance of 100 O-cm. As a result, the coupling resistance varies with the frequency.
The authors of this study noted that electrotonic coupling depends on the ratio between the resistance of the nonjunctional membranes and the junctional membranes. The voltage attenuation technique helps reveal the differences in resistance and shunting through the intercellular medium. However, it is unclear whether electrotonic coupling is electrostatically mediated.
Electrical coupling has also been suggested to play a role in the intercellular transfer of information. There are many examples that support this theory. A message can be a distinct qualitative or quantitative signal, which results in a gradient in the cells. Although gap junctions are absent at many embryonic interaction sites, increasing evidence suggests a role in information transfer.
When it comes to choosing the right Flexible Coupling, there are several factors that you should take into account. Among these factors is the backlash that can be caused by the movement of the coupling. The reason for this problem is the fact that couplings that do not have anti-fungal properties can be easily infected by mold. The best way to avoid this is to pay attention to the moisture content of the area where you are installing the coupling. By following these guidelines, you can ensure the best possible installation.
To ensure that you are getting the most out of your flexible couplings, you must consider their characteristics and how easy they are to install, assemble, and maintain. You should also look for elements that are field-replaceable. Another important factor is the coupling’s torsional rigidity. It should also be able to handle reactionary loads caused by misalignment.
Flexible couplings come in many different types. There are diaphragm and spiral couplings. These couplings allow for axial motion, angular misalignment, and parallel offset. They have one-piece construction and are made from stainless steel or aluminum. These couplings also offer high torsional stiffness, which is beneficial for applications requiring high torques.
Flexible couplings have several advantages over their rigid counterparts. They are designed to handle misalignments of up to seven degrees and 0.025 inches. These characteristics are important in motion control applications. Flexible couplings are also inexpensive, and they do not require maintenance.
A beam coupling is a type of mechanical coupling, usually one solid piece, that connects two mechanical parts. Its performance is largely determined by the material used. Typical materials include stainless steel, aluminum, Delrin, and titanium. The beam coupling is rated for different speeds and torques. The coupling should be selected according to the application. In addition to the material, the application should also consider the speed and torque of the system.
There are two main types of beam couplings. The first is the helical beam coupling, which has a continuous multi spiral cut. This type of coupling offers a high degree of flexibility and compensates for a high degree of misalignment. The second type of beam coupling is the helical shaft coupling, which has a low torsional stiffness, which makes it ideal for small torque applications.
Another type of beam coupling is the multiple beam design, which combines two beams. It allows for more tolerance in manufacturing and installation and protects expensive components from excessive bearing loads. It also helps keep beams shorter than a single beam coupling. This type of coupling also enables a higher torque capacity and torsional stiffness.
Beam couplings can be manufactured with different materials, including stainless steel and aluminum. The “A” series is available in aluminum and stainless steel and is ideal for general-purpose and light-duty applications. It is also economical and durable. This type of coupling can also be used with low torque pumps or encoder/resolver systems.
Pin & bush
The Pin & bush coupling is a versatile, general-purpose coupling with high tensile bolts and rubber bushes. It can tolerate a wide range of operating temperatures and is suitable for use in oil and water-resistance applications. Its unique design enables it to be used in either direction. In addition, it requires no lubrication.
The pin bush coupling is a fail-safe coupling with a long service life and is used for high-torque applications. It provides torsional flexibility and dampens shocks, making it a flexible coupling that protects equipment and reduces maintenance costs. Its hubs are forged from graded cast iron for strength and durability. Besides, the coupling’s elastomer elements reduce vibration and impact loads. It also accommodates a misalignment of up to 0.5 degrees.
Pin & bush couplings are a popular choice for a variety of different applications. This coupling features a protective flange design that protects the coupling flange from wear and tear. The coupling nut is secured to one flange, while a rubber or leather bush sits between the other flange. Its unique design makes it ideal for use in applications where misalignment is a small factor. The rubber bushing also helps absorb vibration and shock.
Mesh tooth couplings are used to transfer torque between two shafts and reduce backlash. However, mesh tooth couplings have some limitations. One disadvantage is the break-away friction factor in the axial direction. This problem is caused by the high contact force between the tooth and gear mesh. This can cause unpredictable forces on the shafts.
In this paper, we present a FEM model for mesh tooth coupling. We first validate the mesh density. To do so, we compute the bolt stress as a uniaxial tensile during the tightening process. We used different mesh sizes and mesh density to validate our results.
The mesh stiffness of gear pairs is influenced by lead crown relief and misalignment. For example, if one tooth is positioned too far in the axis, the mesh stiffness will be decreased. A misaligned gear pair will lose torque capacity. A mesh tooth coupling can be lubricated with oil.
An ideal mesh tooth coupling has no gaps between the teeth, which reduces the risk of uneven wear. The coupling’s quality exposed fasteners include SAE Grade 5 bolts. It also offers corrosion resistance. The couplings are compatible with industrial environments. They also eliminate the need for selective assembly in sleeve couplings.
editor by CX