Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
How Does a Gear Coupling Protect Connected Equipment from Shock Loads and Vibrations?
Gear couplings are designed to provide excellent protection to connected equipment from shock loads and vibrations, making them ideal for use in demanding and heavy-duty applications. The design and features of gear couplings that contribute to this protection include:
- Flexible and Rigid Elements: Gear couplings consist of two hubs with external gears that mesh together. Between these two hubs, there is a center sleeve with internal gear teeth. The center sleeve acts as a flexible element, while the outer hubs act as rigid elements. This combination allows the gear coupling to transmit torque while absorbing and dampening shock loads and vibrations.
- Misalignment Compensation: Gear couplings can accommodate angular, parallel, and axial misalignment between shafts. When the connected equipment experiences misalignment due to dynamic forces or shock loads, the gear coupling can flex and adjust to these changes, preventing excessive stress on the shafts and equipment.
- High Torsional Stiffness: Gear couplings offer high torsional stiffness, meaning they have minimal angular deflection under load. This stiffness helps maintain precise alignment and reduces the likelihood of damage to the connected equipment caused by misalignment-induced vibrations.
- Load Distribution: The toothed gear design of gear couplings ensures a large surface area of contact between the gears. This spreads the torque evenly across the gear teeth, resulting in a uniform distribution of load and reducing the concentration of stress on specific areas.
- Damping Characteristics: The flexible center sleeve in the gear coupling acts as a damping element that absorbs and dissipates vibrations, further protecting the connected equipment from harmful oscillations.
- High-Speed Balancing: Gear couplings are precisely balanced during manufacturing to minimize vibrations and ensure smooth operation even at high speeds. Proper balancing helps prevent resonances and reduces the impact of shock loads on the connected equipment.
By effectively absorbing and dampening shock loads and vibrations, gear couplings extend the life of the connected equipment and surrounding components, reduce maintenance requirements, and contribute to a more reliable and efficient mechanical system. However, it is essential to select the appropriate size and type of gear coupling based on the specific application and operating conditions to ensure optimal protection and performance.
editor by CX 2023-11-16
China high quality Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling gear coupling
Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
Maintenance Requirements for Gear Couplings
Gear couplings, like any mechanical component, require regular maintenance to ensure optimal performance, reliability, and longevity. Proper maintenance can help prevent unexpected failures and downtime, leading to cost savings and increased productivity. Here are the key maintenance requirements for gear couplings:
- Lubrication: Regular and proper lubrication is essential for gear couplings. The coupling’s gear teeth and mating surfaces should be adequately lubricated to minimize friction and wear. The lubrication interval and type of lubricant used depend on the application, load, and operating conditions. It is crucial to follow the manufacturer’s recommendations for lubrication intervals and the appropriate lubricant to use.
- Inspections: Routine inspections should be performed to check for signs of wear, misalignment, or damage. Visual inspections can help detect any abnormalities, such as pitting, scoring, or corrosion on the gear teeth. Additionally, inspections can identify any misalignment issues that may need to be addressed to prevent further damage.
- Torque Monitoring: Monitoring the torque transmitted through the coupling can help identify any abnormal increases that might indicate a problem in the system. Sudden changes in torque levels could signal misalignment or other issues that need attention.
- Alignment Checks: Regularly checking and correcting shaft alignment is crucial for the proper functioning of gear couplings. Misalignment can lead to increased wear and premature failure of the coupling. Proper alignment reduces the stress on the coupling and connected equipment.
- Temperature Monitoring: Monitoring the operating temperature of the coupling can provide insights into potential problems. Abnormally high temperatures could indicate insufficient lubrication or other issues that need investigation.
- Coupling Removal and Cleaning: Periodically removing the coupling for cleaning and inspection of internal components can be beneficial, especially in harsh or dirty environments. This allows for a more thorough inspection and helps maintain the coupling’s performance.
- Replacement of Worn Components: If any components of the gear coupling, such as seals or gaskets, are worn or damaged, they should be replaced promptly to maintain the coupling’s integrity and prevent leaks.
- Proper Storage: If the coupling is temporarily removed from service or stored, it should be stored in a clean and dry environment to prevent corrosion and damage to the components.
It is essential to follow the manufacturer’s maintenance guidelines and recommendations for the specific gear coupling model being used. Regular maintenance and adherence to proper procedures can help extend the service life of gear couplings and ensure reliable and efficient operation in the mechanical system.
editor by CX 2023-10-03
China manufacturer Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling gear coupling
Product Description
Product Description
QZM-82 CNC machining small parts
1. Precision CNC machining parts strictly follow customers’ drawing, packing, and quality requirements.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers;
Detailed Photos
Product Parameters
Our advantage of cnc machining:
| Business Type | Beyond the Manufacturer and strong organized ability in the industrial |
| Benefits | 1. Deeper industrial experience at CNC machining parts service for more than 10-years,our customer’s requirement is our 1st priority. 2. 2D or 3D files is available; 3. We trust the quality priority and we insist the good quality should be based on the customers’ satisfied; 4. Without any MOQ requirement; 5.Faster delivery time; 6. Customized size and specification /OEM available 7. Near ZheJiang Port |
The material
| Materials Accept |
Stainless Steel | SS201, SS303, SS304, SS316 etc. |
| Steel | Q235, 20#, 45#, | |
| Brass | C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37) , C28000(CuZn40) | |
| Iron | 1213, 12L14,1215 etc. | |
| Bronze | C51000, C52100, C54400, etc. | |
| Aluminum | Al6061, Al6063,AL7075,AL5052 etc | |
| Plastic | ABS,POM,PC(Poly-Carbonate),PC+GF,PA(nylon),PA+GF, PMMA(acrylic)PEEK,PEI etc) |
Packaging & Shipping
- We prefer DHL or TNT express or other air freight between 1kg-100kg.
- we prefer sea freight more than 100kg or more than 1CBM
- As per customized specifications.
Company Profile
About us
HangZhou CZPT Technology Co.,Ltd is located in HangZhou City, ZheJiang Province, Which closed the ZheJiang .The Emitech Technology is mainly engaged in the CNC Machinery Industrial Service for 15 years. Our Parts are sold to Europe, America, Japan, South Korea and China in various kinds of industrial.At present, Our company has CNC Turning machines and CNC centers and equip with professional quality and testing instruments.We have full OEM Experience from worldwide, providing them with One-stop solutions for a broad range of applications.We look CZPT to cooperating with you!
Our Advantages
1. Precision CNC machining parts strictly follow customer’s drawing,packing and quality requirement.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers;
After Sales Service
CNC machining prototype design rapid prototyping
We usually provide 12 Months repair service. If our duty, we will respond to send the new parts.
Our Service
| Our Processing | CNC center, CNC milling, CNC turning, drilling, grinding, bending, stamping, tapping, |
| Surface finish | Polishing, sandblasting, Zinc-plated, nickel-plated, chrome-plated, silver-plated, gold-plated, imitation gold-plated, |
| Tolerance | 0.05mm~0.1mm |
| QC System | 100% inspection before shipment |
| Drawing format | CAD / PDF/ DWG/ IGS/ STEP |
| Packaging | Plastic bag/Standard package / Carton or Pallet / As per customized specifications |
| Payment Terms | 30 -50%T/T in advance, 70-50% balance before delivery; Pay Pal or Western Union is acceptable. |
| Trade terms | EXW, FOB, CIF, As per the customer’s request |
| Shipment Terms |
1)We prefer DHL or TNT express or other air freight between 1kg-100kg. 2) we prefer sea freight more than 100kg or more than 1CBM |
| Note | The CNC machining parts are usually custom-made based on the customer’s drawings and samples. So we need the Down Payment |
Maintenance Requirements for Gear Couplings
Gear couplings, like any mechanical component, require regular maintenance to ensure optimal performance, reliability, and longevity. Proper maintenance can help prevent unexpected failures and downtime, leading to cost savings and increased productivity. Here are the key maintenance requirements for gear couplings:
- Lubrication: Regular and proper lubrication is essential for gear couplings. The coupling’s gear teeth and mating surfaces should be adequately lubricated to minimize friction and wear. The lubrication interval and type of lubricant used depend on the application, load, and operating conditions. It is crucial to follow the manufacturer’s recommendations for lubrication intervals and the appropriate lubricant to use.
- Inspections: Routine inspections should be performed to check for signs of wear, misalignment, or damage. Visual inspections can help detect any abnormalities, such as pitting, scoring, or corrosion on the gear teeth. Additionally, inspections can identify any misalignment issues that may need to be addressed to prevent further damage.
- Torque Monitoring: Monitoring the torque transmitted through the coupling can help identify any abnormal increases that might indicate a problem in the system. Sudden changes in torque levels could signal misalignment or other issues that need attention.
- Alignment Checks: Regularly checking and correcting shaft alignment is crucial for the proper functioning of gear couplings. Misalignment can lead to increased wear and premature failure of the coupling. Proper alignment reduces the stress on the coupling and connected equipment.
- Temperature Monitoring: Monitoring the operating temperature of the coupling can provide insights into potential problems. Abnormally high temperatures could indicate insufficient lubrication or other issues that need investigation.
- Coupling Removal and Cleaning: Periodically removing the coupling for cleaning and inspection of internal components can be beneficial, especially in harsh or dirty environments. This allows for a more thorough inspection and helps maintain the coupling’s performance.
- Replacement of Worn Components: If any components of the gear coupling, such as seals or gaskets, are worn or damaged, they should be replaced promptly to maintain the coupling’s integrity and prevent leaks.
- Proper Storage: If the coupling is temporarily removed from service or stored, it should be stored in a clean and dry environment to prevent corrosion and damage to the components.
It is essential to follow the manufacturer’s maintenance guidelines and recommendations for the specific gear coupling model being used. Regular maintenance and adherence to proper procedures can help extend the service life of gear couplings and ensure reliable and efficient operation in the mechanical system.
editor by CX 2023-08-11
China supplier Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling gear coupling
Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CZPT requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
Maintenance Requirements for Gear Couplings
Gear couplings, like any mechanical component, require regular maintenance to ensure optimal performance, reliability, and longevity. Proper maintenance can help prevent unexpected failures and downtime, leading to cost savings and increased productivity. Here are the key maintenance requirements for gear couplings:
- Lubrication: Regular and proper lubrication is essential for gear couplings. The coupling’s gear teeth and mating surfaces should be adequately lubricated to minimize friction and wear. The lubrication interval and type of lubricant used depend on the application, load, and operating conditions. It is crucial to follow the manufacturer’s recommendations for lubrication intervals and the appropriate lubricant to use.
- Inspections: Routine inspections should be performed to check for signs of wear, misalignment, or damage. Visual inspections can help detect any abnormalities, such as pitting, scoring, or corrosion on the gear teeth. Additionally, inspections can identify any misalignment issues that may need to be addressed to prevent further damage.
- Torque Monitoring: Monitoring the torque transmitted through the coupling can help identify any abnormal increases that might indicate a problem in the system. Sudden changes in torque levels could signal misalignment or other issues that need attention.
- Alignment Checks: Regularly checking and correcting shaft alignment is crucial for the proper functioning of gear couplings. Misalignment can lead to increased wear and premature failure of the coupling. Proper alignment reduces the stress on the coupling and connected equipment.
- Temperature Monitoring: Monitoring the operating temperature of the coupling can provide insights into potential problems. Abnormally high temperatures could indicate insufficient lubrication or other issues that need investigation.
- Coupling Removal and Cleaning: Periodically removing the coupling for cleaning and inspection of internal components can be beneficial, especially in harsh or dirty environments. This allows for a more thorough inspection and helps maintain the coupling’s performance.
- Replacement of Worn Components: If any components of the gear coupling, such as seals or gaskets, are worn or damaged, they should be replaced promptly to maintain the coupling’s integrity and prevent leaks.
- Proper Storage: If the coupling is temporarily removed from service or stored, it should be stored in a clean and dry environment to prevent corrosion and damage to the components.
It is essential to follow the manufacturer’s maintenance guidelines and recommendations for the specific gear coupling model being used. Regular maintenance and adherence to proper procedures can help extend the service life of gear couplings and ensure reliable and efficient operation in the mechanical system.
editor by CX 2023-08-04
China OEM Aluminum Metal Tapered Spline Drive Shaft Coupling, Quick Release Electric Motor Gear Shaft Coupling breakaway coupling
Product Description
Quick Details
| Material: | Copper | Technics: | Forged | Type: | Coupling |
| Place of Origin: | QIngdao, China (Mainland) | Model Number: | AT 09 | Brand Name: | AT |
| Connection: | Welding | Shape: | Equal | Head Code: | Round |
| Certificates: | CE ISO | Usage: | Plumbing & CZPT System |
Packaging & Delivery
| Packaging Details: | Export netural packing (PCV bag,inner white box,master carton, Pallet.) or Cutomized packing as request. |
| Delivery Detail: | 30-45 days after receiving deposit |
Packing:
Factory:
Specifications
1.Quality Priority
2. OEM service
3. reasonable price
4. oversea service support
5. 321 stainless steel
ABOUT US:
As your one-stop source, AT PRECAST,we design, manufacturer and distribute precast concrete accessories including the Lifting Systems and Anchoring systems Coil and Ferrule Inserts. for Concrete and Prefabricated area.
As a leader in developing concrete accessory products, our main goal is to produce products that are safer, faster and more cost efficient.
With more than totally 50 years working experience, our entire staff is dedicated to provide you with the best customer service and competitive prices. Our sales force are able to answer your questions quickly and offer you technical support .
Assurance:
100% quality manufacturing.
We guarantee that our products meet your supplied specifications
Extremely competitive pricing
Delivery to your port or front door
4 —- 8 week lead times
We handle all paperwork
Partial container orders
Flexible payment options
Unique tooling options
Full range of packaging options from bulk to retail ready
Complete testing services available
FAQs:
1. Where is your location?
We are located in HangZhou City of China and are closed to Airport. It takes 30minuts by car from Liuting Airport our company.
2. How long has the company been established?
AT INDUSTRY was established in 2009. There is 6 years exporting experiences.
3. How many employees do you have?
Administration / sales 4
Engineering / design as our partner 8
Production as our partners 120
Quality assurance / inspection 10
4. Which countries do you export to?
U.S.A, Germany, France, Italy, UK, Brazil, Middle east of Asia, Thailand,
5. What proportion of your goods are exported?
100% of our production are exported to all over the world.
6. How long does it take to receive samples?
a) Pattern:30-45days after order
b) Sample:30days after pattern finishing.
c) The lead time is the general production period and does not include the transportation time.
7. New product development process
Got tooling order and sample order with 50% deposit—Hold a meeting with the relation dept. to ensure the developing schedule—Design pattern, fixture and gauge and making them in our house—mold steel buying—Machining—Inspection—Send out the sample with initial inspection report.
8. How long is the manufacturing lead time?
Mass Production: 90days after sample approval by yours.
The lead time is the general production period including the transportation time.
We could make some special production arrangement effectively if customer has urgent need.
9. What basis can we buy goods?
We generally offer customers prices FOB& CIF (Carriage, Insurance & Freight). The CIF includes the freight cost to your nominated sea port.
We do provide clearance of goods which needs to be handled by a local freight forwarder.
All local costs and taxes are the responsibility of the buyer. We are happy to offer advisement on shipping if required.
10. What are the payment terms?
Payment terms are negotiable and will improve for long term customers.
During the initial stages, we request 50% of tooling fee in advance with the balance payable on acceptance of samples.
Production orders can be negotiable. We prefer 50% deposit and the balance by T/T before sails. But sometimes T/T 30 days after sails would also acceptable.
11. Which currency can we buy in?
We can deal in USD / Euro currency / GBP.
12. How long does it take to ship goods from China by sea?
It takes about 5 weeks to European ports plus 1 week customs clearance, so you can get the container within 6 to 7 weeks. It takes about 2 weeks to east coast and 3 weeks to west coast US ports. All sea goods are shipped from HangZhou Port.
13. How long does it take to ship goods from China by air?
It takes about 7 days to all major destinations.
14. Can we visit the factory to conduct an audit?
Yes, you are welcome to visit our partner factory by prior agreement.
15. How do we retain client confidentiality?
We are happy to CZPT Confidentiality Agreements with customers and will honor them.
16. Which languages do we do business in?
Although we do business with many countries around the world, we can only communicate effectively in Chinese English.
All information supplied should therefore be supplied in this form.
17. Is there a minimum volume of business required to conduct international purchasing?
There are no minimum volumes, but the prices of the goods, plus the fixed costs of importing makes it more economical to buy in high volumes. All potential customers will be assessed on an individual basis to determine if it appears a viable option for all parties to develop a relationship.
18. What type of parts you are specialized in?
Our business contains 2 areas,
one is for construction precast including lifting system, rigging hardware metal parts.
Another is customized metal business of quality sand castings, investment castings, lost foam castings, hot forgings, cold forgings, stampings, machined parts, injectionmolded plastics parts, etc.
19. Which kind of equipments do you have?
Forging friction press 160Ton, 300Ton, 630Ton, 1200Ton
Casting CZPT of 200kg, 500kg,1000kgs, 2000kgs
Press of 63ton, 120tons
CNC Machining center
CNC Vertical Lathe
CNC Lathe center
Boring machine
Drilling machine
| Standard: | DIN |
|---|---|
| Material: | Aluminium |
| Connection: | Female |
| Surface Treatment: | Plated Copper |
| Head Type: | Round |
| Original: | China |
| Customization: |
Available
| Customized Request |
|---|
Functions and Modifications of Couplings
A coupling is a mechanical device that connects two shafts and transmits power. Its main purpose is to join two rotating pieces of equipment together, and it can also be used to allow some end movement or misalignment. There are many different types of couplings, each serving a specific purpose.
Functions
Functions of coupling are useful tools to study the dynamical interaction of systems. These functions have a wide range of applications, ranging from electrochemical processes to climate processes. The research being conducted on these functions is highly interdisciplinary, and experts from different fields are contributing to this issue. As such, this issue will be of interest to scientists and engineers in many fields, including electrical engineering, physics, and mathematics.
To ensure the proper coupling of data, coupling software must perform many essential functions. These include time interpolation and timing, and data exchange between the appropriate nodes. It should also guarantee that the time step of each model is divisible by the data exchange interval. This will ensure that the data exchange occurs at the proper times.
In addition to transferring power, couplings are also used in machinery. In general, couplings are used to join two rotating pieces. However, they can also have other functions, including compensating for misalignment, dampening axial motion, and absorbing shock. These functions determine the coupling type required.
The coupling strength can also be varied. For example, the strength of the coupling can change from negative to positive. This can affect the mode splitting width. Additionally, coupling strength is affected by fabrication imperfections. The strength of coupling can be controlled with laser non-thermal oxidation and water micro-infiltration, but these methods have limitations and are not reversible. Thus, the precise control of coupling strength remains a major challenge.
Applications
Couplings transmit power from a driver to the driven piece of equipment. The driver can be an electric motor, steam turbine, gearbox, fan, or pump. A coupling is often the weak link in a pump assembly, but replacing it is less expensive than replacing a sheared shaft.
Coupling functions have wide applications, including biomedical and electrical engineering. In this book, we review some of the most important developments and applications of coupling functions in these fields. We also discuss the future of the field and the implications of these discoveries. This is a comprehensive review of recent advances in coupling functions, and will help guide future research.
Adaptable couplings are another type of coupling. They are made up of a male and female spline in a polymeric material. They can be mounted using traditional keys, keyways, or taper bushings. For applications that require reversal, however, keyless couplings are preferable. Consider your process speed, maximum load capacity, and torque when choosing an adaptable coupling.
Coupling reactions are also used to make pharmaceutical products. These chemical reactions usually involve the joining of two chemical species. In most cases, a metal catalyst is used. The Ullmann reaction, for instance, is an important example of a hetero-coupling reaction. This reaction involves an organic halide with an organometallic compound. The result is a compound with the general formula R-M-R. Another important coupling reaction involves the Suzuki coupling, which unites two chemical species.
In engineering, couplings are mechanical devices that connect two shafts. Couplings are important because they enable the power to be transmitted from one end to the other without allowing a shaft to separate during operation. They also reduce maintenance time. Proper selection, installation, and maintenance, will reduce the amount of time needed to repair a coupling.
Maintenance
Maintenance of couplings is an important part of the lifecycle of your equipment. It’s important to ensure proper alignment and lubrication to keep them running smoothly. Inspecting your equipment for signs of wear can help you identify problems before they cause downtime. For instance, improper alignment can lead to uneven wear of the coupling’s hubs and grids. It can also cause the coupling to bind when you rotate the shaft manually. Proper maintenance will extend the life of your coupling.
Couplings should be inspected frequently and thoroughly. Inspections should go beyond alignment checks to identify problems and recommend appropriate repairs or replacements. Proper lubrication is important to protect the coupling from damage and can be easily identified using thermography or vibration analysis. In addition to lubrication, a coupling that lacks lubrication may require gaskets or sealing rings.
Proper maintenance of couplings will extend the life of the coupling by minimizing the likelihood of breakdowns. Proper maintenance will help you save money and time on repairs. A well-maintained coupling can be a valuable asset for your equipment and can increase productivity. By following the recommendations provided by your manufacturer, you can make sure your equipment is operating at peak performance.
Proper alignment and maintenance are critical for flexible couplings. Proper coupling alignment will maximize the life of your equipment. If you have a poorly aligned coupling, it may cause other components to fail. In some cases, this could result in costly downtime and increased costs for the company.
Proper maintenance of couplings should be done regularly to minimize costs and prevent downtime. Performing periodic inspections and lubrication will help you keep your equipment in top working order. In addition to the alignment and lubrication, you should also inspect the inside components for wear and alignment issues. If your coupling’s lubrication is not sufficient, it may lead to hardening and cracking. In addition, it’s possible to develop leaks that could cause damage.
Modifications
The aim of this paper is to investigate the effects of coupling modifications. It shows that such modifications can adversely affect the performance of the coupling mechanism. Moreover, the modifications can be predicted using chemical physics methods. The results presented here are not exhaustive and further research is needed to understand the effects of such coupling modifications.
The modifications to coupling involve nonlinear structural modifications. Four examples of such modifications are presented. Each is illustrated with example applications. Then, the results are verified through experimental and simulated case studies. The proposed methods are applicable to large and complex structures. They are applicable to a variety of engineering systems, including nonlinear systems.
editor by CX 2023-04-21
Customize Cheap made in China – replacement parts – steering drive shaft A1.1-4 Cardan Pto Drive Spline Shaft for Railways Vehicle Truck Drive Motor Motor with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto factory in China with 5 various branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
tractor pto repair Adhering push shaft centre to pto travel shaft for sale “Survival basic mini travel shaft by pto shaft with keyway Good quality, john deere pto shaft Improvement generate shaft centre paarden eiland by pto pump shaft adapter Technologies pto shaft adapter & pto shaft tube dimensions Credit”, The firm will continuously boost item efficiency to satisfy the escalating customer demands in the demanding fashion of operate. It is our goal to source a vast variety of top quality goods at reasonably priced rates, offer the best services for buyers pleased and add to our continued improvement.
| Usage | For new energy vehicle electric generate shaft/push motor shaft/Motor rotation shaft/Motor spline shaft/Motor shaft/Elevator shaft,and many others |
| Specification | Duration:one hundred-500mm,Outdoors Dia.:20-90mm,Spline module:.8-3 or Custom-made |
| Surface area Treament | Anodizing/ Oxiding/ Zinc plating/ Nickel plating/ Chrome plating/ Silver plating/ EPT plating/ Imitation EPT plating/ Sand blasted/ Brushed/ Silk monitor/ Passivation/ Electricity coating/ Portray/ Alodine/ Heat remedy/ Teflon etc. |
| Tolerance | +/-.005mm or +/- .0002 |
| Substance | Stainless Metal,Carbon Metal We take care of many other type of materials. Please contact us if your required content is not outlined earlier mentioned. |
| Inspecation Equipment | Coordinate measuring machining/ Projector/ Caliper/ Microscope/ Micrometer/ Large gauge/ Roughness tester/ Gauge block/ Thread gauge etc. |
| Quality Manage | a hundred% inspection |
| Customized | Indeed,all are personalized according clients’ drawings layout or sample |
| Our Customer | BYD,TOYOTA,Honda,GAIC Group ,SAIC group, BAIC group,Broad-Ocean,AKEI,Inovance, Chinaedrive,etc |
Best China manufacturer & factory agricultural in Orumiyeh Iran machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price
Our main products are chain , gears, sprocket, Needle Roller bearings, Cylindrical Roller Bearings, Rod end Bearings, Spherical basic bearings, Keep track of roller Bearings for Guideway, Roller Bearings, Mix Bearings for forklifts, Drinking water Pump Bearings, SNR Car Bearings and all varieties of Spherical Bearings.
Overview
Swift Information
- Guarantee:
-
one.5 many years
- Applicable Industries:
-
Production Plant
- After Warranty Service:
-
On the internet support
- Local Service Location:
-
none
- Showroom Location:
-
ITALY
- Sort:
-
Shafts
- Use:
-
tractors
- Area of Origin:Zhejiang, China
- Model Name:
-
OEM
- Neighborhood Services Spot:
-
Italy
Are you seeking for a PTO drinking water pump or PTO- pushed generator? Hundreds of PTO areas from EPG indicate you can locate PTO shaft elements and accessories for what ever kind of products you are working with. From PTO push shafts to defend components, we have dozens of replacement PTO areas. We inventory Eurocardan components as properly as Neapco components because those are names you can have faith in. Regardless of whether you require flex couplers or PTO shaft assemblies, we can aid.
- certification:
-
CE
Adhering to “Survival by Top quality, Growth by Technology & Credit rating”, The business will continually boost product efficiency to satisfy the growing buyer needs in the rigorous type of function.
- Materials:
-
Metallic
- plastic guard:
-
YWBSYSBW tractor pto shaft
- function:
-
transmit electrical power tractor pto shaft
Industrial Gearbox-EPG Series GEPG Travel Industrial Reducer Series G The Series G helical parallel shaft and bevel helical appropriate angle travel industrial gearbox have been launched to satisfy the requirements of present-day demanding apps in the medium and heavy-obligation sector of the power transmission market. Progressive modular design engineering has minimized manufactured part depend to improve availability of item. Industrial Gearbox – David Brown Sequence H The Collection H industrial gearbox is offered in iEPG Push Industrial Gearbox David Brownn-line and proper angle variations in single, double, triple and quadruple reduction gear stages. The modular design and construction of the Sequence H provides numerous engineering and functionality rewards including a high degree of interchangeability of parts and sub assemblies. This in switch provides substantial economies of generation while keeping the optimum normal of component integrity.
- spline:
-
1 3/8 Z6/Z21 tractor pto shaft
Supply Capability
- Supply Capability:
- 10000 Piece/Pieces for every Thirty day period tractor pto shaft
Packaging & Shipping
- Packaging Information
- carton/iron crate tractor pto shaft
- Port
- ningbo or shanghai
On the web Customization
Item Details
Product Info
PTO Shaft
The energy just take-off (PTO) is a advanced mechanism, allowing implements to draw energy from the motor and transmit it to another software. It performs as a mechanical gearbox which can be mounted on the vehicle’s transmission.
The electrical power get-off shaft (PTO shaft) is a crucial element, designed and created for continuous hefty-duty use. A very good PTO shaft ought to be strong adequate to bear the torsion and shear pressure and decrease vibration.
Setforge, the forging subsidiary of Ever-Electrical power Team, manufactures cold extruded PTO shafts for all types of agriculture autos. Our PTO shafts supply excellent dependability and toughness during everyday use.
EP Group has been internationally recognized as a reliable world-wide supplier. Our point out-of-the-artwork producing approach and seasoned engineers make certain the top-top quality of all Farinia components.
| Soon after Warranty Support | Video clip technological assist |
| Applicable Industries | Production Plant |
| Local Service Location | Italy |
| Showroom Place | Italy |
| Guarantee | 1.5 a long time |
| Type | Shafts |
| Use | Tractors |
| Spot of Origin | China |
| China | Zhejiang |
| Model Title | EPG |
| certification | CE |
| Materials | Metallic |
| plastic guard | YWBSYSBW tractor pto shaft |
| purpose | transmit power tractor pto shaft |
| spline | 1 3/8 Z6/Z21 tractor pto shaft |
Product Show
Item Exhibit
CAT 2 High definition Rapid Hit …
15″ Heavy Responsibility Ear …
Agricultural Machi …
CompanyInfo
Company Profile
Ever-Electrical power Team
EPG have higher-tech machinery and test gear. We can make globe class high precision merchandise.
Certifications
Certifications
Cargo & Payment
Our Benefits
A: Your inquiry related to our goods or prices will be replied in 24 several hours.
B: Defense of your revenue region, tips of design and all your personal data.
C: Very best top quality and competitive value.
……
faq
FAQ
1) How can I location purchase?
A: You can make contact with us by email about your get particulars, or place order on line.
2) How can I pay out you?
A: Right after you affirm our PI, we will ask for you to pay. T/T (HSBC lender) and Paypal, Western Union are the most normal methods we are employing.
……
Factory sales made in China – replacement parts – in Grenoble France Customized High Quality Spline Shaft and Gear Shaft for Agricultural Machinery with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For a lot more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| Use | For new vitality automobile electric drive shaft/push motor shaft/Motor rotation shaft/Motor spline shaft/Motor shaft/ EPT shaft,and many others |
| Specification | Size:100-500mm,Outdoors Dia.:20-90mm,Spline module:.8-3 or Tailored |
| Area Treament | Anodizing/ Oxiding/ Zinc plating/ Nickel plating/ Chrome plating/ Silver plating/ Gold plating/ Imitation gold plating/ Sand blasted/ Brushed/ Silk display screen/ Passivation/ Energy coating/ Painting/ Alodine/ Heat treatment/ Teflon and many others. |
| Tolerance | +/-.005mm or +/- .0002 |
| Substance | Stainless Metal,Carbon Steel We handle a lot of EPT sort of components. Remember to make contact with us if your required materials is not listed above. |
| Inspecation Tools | Coordinate measuring machining/ Projector/ Caliper/ Microscope/ Micrometer/ Higher gauge/ Roughness tester/ Gauge block/ Thread gauge and many others. |
| Quality Management | 100% inspection |
| Custom-made | Yes,all are custom-made in accordance clients’ drawings design or sample |
| Our Buyer | BYD,TOYOTA,Honda,GAIC Team ,SAIC team, BAIC group,Broad-Ocean,AKEI,Inovance, Chinaedrive,and so on |
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique equipment manufacturer’s (OEM) component figures or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our organization and the listed alternative elements contained herein are not sponsored, approved, or produced by the OEM.
CNC factory China how to determine pto shaft length Machining Customzied High Precision Hydraulic Shaft Drive Shaft Spline Shaft Shaft Roller with ce certificate top quality low price
We – EPG Group the greatest agricultural gearbox and pto manufacturing unit in China with five different branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
99 crv generate shaft Our pto shaft connector organization pto shafts for sale uk has 2007 lincoln mkx push shaft strong one piece driveshaft economic new driveshaft cost strength, pto shear bolt size builds 1 three/8 inch pto shaft up triangular pto shaft a pto shaft slip clutch united kingdom technician team contingent with large top quality, possesses the manufacturing assembly line of technicalization in China and ideal technique checking on product top quality and operates marketing and advertising networks through the country. Our products are offering properly in Chinese markets and some items sold in intercontinental marketplaces are properly acquired by Chinese and international customers at house and abroad. Machining Abilities
| Machined Sleeve & Ring | Machined Hubs & Disks | Machined Shaft & Roll | Machined Bar & Block |
| OD max 1700 mm | D max 1600 mm | D max 100 mm | D max 650 mm |
| ID max 1500 mm | d max 100 mm | L max 8000 mm | L max 4400 mm |
| H max 500 mm | H max 800 mm | H max 900 mm | Weight max 7500 kg |
| Weight max 1500 kg | Weight max 1000 kg | Weight max 4000 kg |
Merchandise Details
| Machining Range | CNC machining customzied Substantial Precision pto shaft with splines |
| Market Served | Construction machinery parts,oilfield petroleum parts,engine parts,marine parts,Spare Parts for Mining Machinery,Coal Mine Drill,Forklift,Agricultural machinery,Railway and train,Excavator,Hydraulic Field Parts,Shipbuilding parts,Pump spare parts,Industrial Machines,Grinding,Roller Press |
| Steel Treatment | Forging,Q+T(Quenching+Tempering),Solution treatment,Heat treatment |
| Forging Technique | Forging,open die forging,free forging,ring forging,hot rolling. |
| Machining Service | Rough machining,Precision machining,Milling,Rolling,Hole Drilling,Stamping |
| Gear: | CNC Machining Centres |
| Substance: | Carbon steel ,Alloy steel ,Stainless steel |
| Surface treatment: | Heat Treatment,Oxide coating,plating,ending,painting,galvanized,plated chrome |
| Software: | Oil and gas,Oilfield,Petrochemcial,Engineering Construction Machinery,Tools |
| Chrome thickness: | twenty~30micron |
| Max Length of bar | 6000mm |
| Max Weight of Machined | 8000-10000kg |
| Max OD of Ring | 2000mm |
| Roughness: | Ra 0.2micron (max) |
| Yield Strength: | ≥320 Mpa |
| Tensile Strength: | ≥580 Mpa |
| Main Products: | Machined Forging Rings,Machined Shafts,Machined Flat Round Bars,Machined Sleeves,Bushes,Bushing, Machined Parts,Blocks, Machined shells,Shaft Axle Scroll Axis Rotor Roll |
Principal Gear List(Forging & Machining Centre )
| Factory Machine | Amount/Set | Problem |
| 5 Ton Hydraulic Hammer | one | Outstanding |
| 2500 Ton Friction Press | one | Exceptional |
| Heating Furnace | 2 | Excellent |
| Operation | one | Excellent |
| Cutting Machine | 5 | Good |
| CNC Machining Center | four | Exceptional |
| CNC Lathe | fifteen | Good |
| CNC Drilling | three | Exceptional |
| CNC milling Machine | ten | Outstanding |
| Grinding Machine | two | Exceptional |
| Pneumatic Marking Machine | 1 | Great |
| CNC Packing Machine | one | Great |
Process
Ingot→heat → forging → Heat treatment (Normalizing+ tempering) → Inspection
→rough machining→UT →2nd Heat treatment →finishing machining →Inspection → floor treatment→Packing →Shipping
Machining Benefit
30 many years encounter in forging and machining
Excellent Producing system
Supply sample, one piece is 1 orderCustomized you the most appropriate goods
New China defender front propshaft Product Stainless Steel Spline Shaft with ce certificate top quality low price
We – EPG Team the largest agricultural gearbox and pto manufacturing unit in China with 5 distinct branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
xj sye driveshaft Our replacing u joint on pto shaft merchandise bent pto shaft are 2002 jeep grand cherokee entrance generate shaft selling kodiak bush hog areas nicely maruti 800 entrance axle price tag in tractor pto dimensions Chinese pto shaft shapes marketplaces chelsea pto mounting bolts and g entire body driveshaft some products sold in intercontinental markets are effectively acquired by Chinese and overseas consumers at house and overseas. Our organization has sound economic power, builds up a technician crew contingent with large quality, possesses the production assembly line of technicalization in China and ideal method checking on product good quality and operates advertising networks throughout the region.
| Business profile
EPT was set up on Jan., 2007, we have far more than eighty personnel and more than 20% of them are specialised complex staff. Coming together the way, EPT has become a expert producer and exporter in precision shaft, micro shaft, motor shaft, stainless metal shaft, non-stHangZhourd shaft and hardware elements. The goods are utilised in different fields this sort of as residence appliance, micro motor, computer, scanner, printer, conversation, automobile and machinery gear and instrument and so on. |
|
|
We passed IATF16949:2016 Quality Management System Certification:
We handed ISO9001:2015 Quality Management System Certification.
FAQ:
1,How can I get samples?
If sample benefit beneath 20$,we can deliver by free of charge of charge.Normally we would charge samples.
For Sample shipping, it truly is much better if buyer can have collect courier account amount.
Or customer can arrange neighborhood courier firm to choose up samples from our manufacturing unit.
Also we can prepare in our aspect and demand courier fees accordingly. Any additional issue,p EPT create to our e mail box!
2,What is the leadtime for sample purchase ?
ten-fifteen times right after receiving your sample order.
3,What is leadtime for mass amount ?
It is rely on the quantity.
For case in point: If the amount as 10000pcs, 15 days for the leadtime soon after receiving PO.
four,Payment Phrases:
one.one hundred% T/T in EPT (30% deposit,harmony paid before cargo).
2.a hundred% T/T (thirty% deposit, balance 30 days soon after B/L day),but masking CITIC.
three.L/C
4.D/P
five.D/A
6.Paypal
five,What is your minimum order quantity for the items in the order?
2000pcs for each size except for sample.
six,Are you a trading company or manufacturer?
We are a manufacturer, specialized in producing and exporting various shafts and pins