China Good quality CHINAMFG Gicl Type Drum Gear Coupling Manufacturing Auto High Quality Couplings gear coupling

Produktbeskrivelse

 GICL Type Drum Gear Coupling(JB/T 8854.3-2001) 

♦Beskrivelse
Funktioner:
1. Lille radial dimension og stor bæreevne anvendes almindeligvis i akseltransmissioner under lav hastighed og tung belastning.
2. Under den samme ydre diameter af den indre gearhylse og koblingens maksimale ydre diameter er den tromleformede gearkoblings bæreevne 15-20% højere end den lige tandkoblings gennemsnitlig.
3. Den kan kompensere for den relative forskydning af 2 akser i en bestemt vinkel og arbejde lange afstande med den midterste aksel.
4. Den er egnet til at forbinde 2 vandrette koaksiale akser og drive aksler med en bestemt vinkelforskydning.

♦Main Dimension and Parameter

Note:
1. The mass and moment of inertia of the coupling are approximated by the minimum diameter and maximum length of the shaft hole.
2. D2≥465mm, the sealing ring is bonded by circular section rubber strips.
3. J1 type shaft hole can also be used without shaft end retainer as required.
4. Angular compensation of 1°30′ is allowed.
5. The allowable radial compensation amount △ Y is listed in the following table.

 ♦ Liste over andre produkter

 ♦Vores virksomhed

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. er en højteknologisk virksomhed, der specialiserer sig i design og fremstilling af forskellige typer koblinger. Virksomheden har 86 ansatte, herunder 2 ledende ingeniører og ikke færre end 20 fagfolk inden for mekanisk design og fremstilling, varmebehandling, svejsning og andre fagfolk.
Avanceret og fornuftig proces, komplette detektionsmetoder. Vores virksomhed introducerer aktivt udenlandsk avanceret teknologi og udstyr, og baseret på de specifikke forhold udnytter vi fordelene fuldt ud og udfører mere forskning og innovation. Vi lever strengt op til høj kvalitet og opererer i nøje overensstemmelse med ISO9000 kvalitetscertificeringssystemets standardtilstand.
Vores virksomhed leverer forskellige slags produkter. Høj kvalitet og rimelige priser. Vi holder os til princippet om "kvalitet først, service først, løbende forbedring og innovation for at imødekomme kundernes behov" for ledelsen og "nul fejl, nul klager" som kvalitetsmål. 

♦Vores tjenester
1. Designtjenester
Vores designteam har erfaring med kardanaksler i forbindelse med produktdesign og -udvikling. Hvis du har behov til dit nye produkt eller ønsker at foretage yderligere forbedringer, er vi her for at tilbyde vores support.

2. Produkttjenester
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→ Packing→ Shipping

3. Prøveprocedure
Vi kunne udvikle prøven i henhold til dine krav og løbende ændre prøven for at imødekomme dine behov.

4. Forskning og udvikling
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5. Kvalitetskontrol
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.

♦Ofte stillede spørgsmål
Q 1: Er du en handelsvirksomhed eller en producent?
A: Vi er en professionel producent, der specialiserer sig i fremstilling af forskellige serier af koblinger.

Q2: Kan du lave OEM?
Ja, det kan vi. Vi tilbyder OEM og ODM til alle kunder med brugerdefinerede kunstværker i PDF- eller AI-format.

Q3: Hvor lang er din leveringstid?
Generelt er det 20-30 dage, hvis varerne ikke er på lager. Det afhænger af mængden.

Q 4: Tilbyder I prøver? Er det gratis eller koster det ekstra?
Yes, we could offer the sample but not for free. Actually, we have a very good price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: Hvor lang er jeres garanti?
A: Vores garanti er 12 måneder under normale omstændigheder.

Q 6: Hvad er MOQ'en?
A: Normalt er vores MOQ 1 stk.

Q 7: Har I inspektionsprocedurer for koblinger?
A: 100% selvinspektion før pakning.

Q 8: Kan jeg besøge jeres fabrik inden bestillingen?
A: Selvfølgelig, velkommen til at besøge vores fabrik.

Q9: Hvad er din betaling?
A: T/T.  
 

♦Kontakt os

Web: huadingcoupling
Tilføj: Nr. 11 HangZhou Road, Chengnan park, HangZhou City, ZheJiang-provinsen, Kina

Types of Gear Coupling Designs

There are several types of gear coupling designs available, each with its own specific characteristics and applications. The main types of gear couplings are:

1. Sleeve Gear Couplings: Sleeve gear couplings consist of two hubs with external gears and a center sleeve with internal gears. The hubs are mounted on the shaft ends, and the center sleeve connects the two hubs. This design allows for angular and axial misalignment while transmitting torque between the shafts. Sleeve gear couplings are suitable for general-purpose applications and offer easy maintenance.
2. Continuous Sleeve Gear Couplings: Continuous sleeve gear couplings are an improved version of sleeve gear couplings. In this design, the center sleeve is extended to cover the entire length of the hubs, providing additional support and increasing torque capacity. The continuous sleeve design reduces the bending effect on the shafts and allows for higher torque transmission.
3. Flanged Sleeve Gear Couplings: Flanged sleeve gear couplings are similar to continuous sleeve couplings but include flanges at the ends of the center sleeve. These flanges provide extra support and help maintain proper alignment between the shafts. Flanged sleeve gear couplings are commonly used in high-speed and heavy-duty applications.
4. Half Gear Couplings: Half gear couplings, also known as semi-rigid gear couplings, consist of one flexible half and one rigid half. The flexible half has internal gear teeth, while the rigid half has external gear teeth. This design allows for angular misalignment while offering higher torque capacity than fully flexible couplings. Half gear couplings are often used in applications where some degree of misalignment is expected, but not as much as what sleeve gear couplings can handle.
5. Full Gear Couplings: Full gear couplings consist of two hubs with external gear teeth that mesh directly with each other. This design provides high torque capacity and is suitable for applications requiring minimal misalignment. Full gear couplings offer excellent torsional rigidity and are often used in precision applications where accurate shaft alignment is critical.
6. Flexible Gear Couplings: Flexible gear couplings combine the features of gear couplings and flexible couplings. They consist of two hubs with external gears and a flexible element, such as a membrane or elastomeric material, connecting the hubs. This design allows for some misalignment while providing damping of vibrations and shock absorption.

Each type of gear coupling has its advantages and limitations, and the choice of coupling design depends on the specific requirements of the application, including the level of misalignment, torque capacity, speed, and environmental conditions.

editor by CX 2023-12-13